OBDEleven et Skoda Octavia MK2 : Codages, Options Cachées … toutes les possibilités

Découvrez les Secrets de votre Skoda Octavia II avec l’application mobile OBDEleven et les modules OBD11 PROPACK & NEXTGEN.

Dans cet article, découvrons ensemble toutes les possibilités offertes par les modules BT de la marque OBD11 sur l’OCTAVIA MK2 : activation d’options cachées, codages longs, recherche de panne, personnalisation, codages en un seul clic, effacer les codes défaut …

Véhicule concerné dans cet article

Marque : Skoda
Model : Octavia MK2

Quelles sont les possibilités d’activation sur Skoda Octavia – 2008-2013 avec OBDEleven ?

Nbre de codages / possibilités : 100

Nom du Codage	Descriptif
ESC deactivation V2	ESC - Electronic Stability Control (a computerized technology that improves a vehicle's stability by detecting and reducing loss of traction (skidding)). ASR - A traction control system (TCS), also known as ASR Usable when ESC deactivation app doesn't work. ⚙️ FUNCTION Turn OFF the ASR. Turn OFF the ASR and ESC. ☑️ IN CAR PROCEDURES To disable the ESC press and hold the ESC button for 5 seconds. ⚠️ ATTENTION Not working with ABS units 1K0907379AH/1K0907379AJ/1K0907379BH/1K0907379BJ/1K0907379BK/1K0907379BL ECS function is for security purpose and helps to avoid accidents. We do not encourage or recommend to turn OFF this function.
Hill hold assist settings	This feature can prevent rollback on an incline by holding the brakes while you switch between the brake and acceleration pedals. Hill start assist does not increase your traction, it just prevents you from rolling backwards (or in some cases, forwards if you are pointing down hills and are backing up). ⚙️ FUNCTION Adjust hill hold assist: EARLY - Start with low RPMS NORMAL - Standard LATE - Start with high RPMS and slopping clutch 📖 REQUIREMENTS Hill hold assist must be enabled.
Cornering Lights	The fog lights with the function “Corner” improve the illumination of areas close to the vehicle: turning, parking and are regulated according to the steering angle. ⚙️ FUNCTION Turn ON or OFF Cornering Light 📖 REQUIREMENTS Fog lights must be installed into the vehicle.
DRL indicator in dashboard	The DRL indicator light means that the daytime running lights are ON and operating properly. When the headlights are turned on, the DRL indicator light should turn off. DRL - Daytime Running Lights ⚙️ FUNCTION Enable (ON) or Disable (OFF) DRL symbol in dashboard. ⚠️ ATTENTION This app is working only if your dashboard have DRL indication LED.
DRL settings	DRL- Daytime Running Lights. ⚙️ FUNCTION DRL OFF - Deactivate (OFF) Daytime Runnings Lights DRL via Separate lights DRL via Headlights - Daytime Running Lights active on Headlights DRL via Fog Lights - Daytime Running Lights active on Fog Lights DRL via Headlights and Fog lights - Daytime Running Lights active both on Headlights and Fog lights
Headlight washer	⚙️ FUNCTION Turn ON or OFF Headlights Washer System. 📖 REQUIREMENTS Vehicle must have Headlights Washing System installed. ⚠️ ATTENTION Deactivating the Headlights Washing System with Xenon headlights is prohibited and is against the law in some countries.
Remote windows function	Open or close windows via key fob. ⚙️ FUNCTION To turn OFF or ON the comfort windows. 📖 REQUIREMENTS Windows must be calibrated. ☑️ IN CAR PROCEDURES In the head unit follow the instruction: 1) Vehicle 2) Setup 3) Open and Close 4) Conv. opening (all windows or drivers window)
Footwell lights	Use this application after footwell lights installation to activate it. ⚙️ FUNCTION Activate (ON) for LED, Bulb or Deactivate (OFF) Footwell lights 📖 REQUIREMENTS Footwell lights must be installed in the vehicle.
ESC deactivation V2	ESC - Electronic Stability Control (a computerized technology that improves a vehicle's stability by detecting and reducing loss of traction (skidding)). ASR - A traction control system (TCS), also known as ASR Usable when ESC deactivation app doesn't work. ⚙️ FUNCTION Turn OFF the ASR. Turn OFF the ASR and ESC. ☑️ IN CAR PROCEDURES To disable the ESC press and hold the ESC button for 5 seconds. ⚠️ ATTENTION Not working with ABS units 1K0907379AH/1K0907379AJ/1K0907379BH/1K0907379BJ/1K0907379BK/1K0907379BL ECS function is for security purpose and helps to avoid accidents. We do not encourage or recommend to turn OFF this function.
Hill hold assist settings	This feature can prevent rollback on an incline by holding the brakes while you switch between the brake and acceleration pedals. Hill start assist does not increase your traction, it just prevents you from rolling backwards (or in some cases, forwards if you are pointing down hills and are backing up). ⚙️ FUNCTION Adjust hill hold assist: EARLY - Start with low RPMS NORMAL - Standard LATE - Start with high RPMS and slopping clutch 📖 REQUIREMENTS Hill hold assist must be enabled.
Cornering Lights	The fog lights with the function “Corner” improve the illumination of areas close to the vehicle: turning, parking and are regulated according to the steering angle. ⚙️ FUNCTION Turn ON or OFF Cornering Light 📖 REQUIREMENTS Fog lights must be installed into the vehicle.
DRL indicator in dashboard	The DRL indicator light means that the daytime running lights are ON and operating properly. When the headlights are turned on, the DRL indicator light should turn off. DRL - Daytime Running Lights ⚙️ FUNCTION Enable (ON) or Disable (OFF) DRL symbol in dashboard. ⚠️ ATTENTION This app is working only if your dashboard have DRL indication LED.
DRL settings	DRL- Daytime Running Lights. ⚙️ FUNCTION DRL OFF - Deactivate (OFF) Daytime Runnings Lights DRL via Separate lights DRL via Headlights - Daytime Running Lights active on Headlights DRL via Fog Lights - Daytime Running Lights active on Fog Lights DRL via Headlights and Fog lights - Daytime Running Lights active both on Headlights and Fog lights
Headlight washer	⚙️ FUNCTION Turn ON or OFF Headlights Washer System. 📖 REQUIREMENTS Vehicle must have Headlights Washing System installed. ⚠️ ATTENTION Deactivating the Headlights Washing System with Xenon headlights is prohibited and is against the law in some countries.
Remote windows function	Open or close windows via key fob. ⚙️ FUNCTION To turn OFF or ON the comfort windows. 📖 REQUIREMENTS Windows must be calibrated. ☑️ IN CAR PROCEDURES In the head unit follow the instruction: 1) Vehicle 2) Setup 3) Open and Close 4) Conv. opening (all windows or drivers window)
Footwell lights	Use this application after footwell lights installation to activate it. ⚙️ FUNCTION Activate (ON) for LED, Bulb or Deactivate (OFF) Footwell lights 📖 REQUIREMENTS Footwell lights must be installed in the vehicle.
Auto Lock Rear Lid	The rear lid auto locks when the vehicle starts moving and accessing speed of 15 km/h. ⚙️ FUNCTION Turn OFF or ON the auto lock of rear lid.
Brake Lights with Ignition	After pressing the brake pedal the brake lights start to light. Adjust the settings of brake lights to work or not to work after the ignition is OFF. ⚙️ FUNCTION Turn OFF or ON the function for brake lights to work after the ignition is switched OFF.
Central Locking	Power door locks (also known as electric door locks or central locking) allow the driver or front passenger to simultaneously lock or unlock all the doors of an automobile or truck, by pressing a button or flipping a switch. This one-click application allows to unlock just the driver door and with the second press of the unlock button on the key fob other doors will be unlocked. ⚙️ FUNCTION Set Central Locking to unlock just the driver door or all doors with a press of unlock button on the key fob.
CH Lights Mode	CH - Coming Home makes it easier to see your surroundings when you get out of your car in the dark. ⚙️ FUNCTION Switch CH Lights to Auto or Manual. Auto - when it is dark outside. Manual - flash high beams when the ignition is off to activate. 📖 REQUIREMENTS For Auto CH Lights the auto headlights are required. CH Lights function must be turned ON.
CH Lights Timer Functionality	CH - Coming Home makes it easier to see your surroundings when you get out of your car in the dark. ⚙️ FUNCTION Change when the coming home lights timer will start to calculate. When Ignition OFF - after the ignition will be switched OFF, CH lights will start to work for the set time. When Door Open - after the doors will be opened, CH lights will start to work for the set time. 📖 REQUIREMENTS CH Lights function must be turned ON.
CH/LH Lights	CH - Coming Home makes it easier to see your surroundings when you get out of your car in the dark. LH - Leaving Home works by turning on the lights when you use the key fob to unlock your doors. ⚙️ FUNCTION Turn ON or OFF CH/LH Lights function. 📖 REQUIREMENTS The vehicle must have automatic headlights.
Auto Lock Rear Lid	The rear lid auto locks when the vehicle starts moving and accessing speed of 15 km/h. ⚙️ FUNCTION Turn OFF or ON the auto lock of rear lid.
Brake Lights with Ignition	After pressing the brake pedal the brake lights start to light. Adjust the settings of brake lights to work or not to work after the ignition is OFF. ⚙️ FUNCTION Turn OFF or ON the function for brake lights to work after the ignition is switched OFF.
Central Locking	Power door locks (also known as electric door locks or central locking) allow the driver or front passenger to simultaneously lock or unlock all the doors of an automobile or truck, by pressing a button or flipping a switch. This one-click application allows to unlock just the driver door and with the second press of the unlock button on the key fob other doors will be unlocked. ⚙️ FUNCTION Set Central Locking to unlock just the driver door or all doors with a press of unlock button on the key fob.
CH Lights Mode	CH - Coming Home makes it easier to see your surroundings when you get out of your car in the dark. ⚙️ FUNCTION Switch CH Lights to Auto or Manual. Auto - when it is dark outside. Manual - flash high beams when the ignition is off to activate. 📖 REQUIREMENTS For Auto CH Lights the auto headlights are required. CH Lights function must be turned ON.
CH Lights Timer Functionality	CH - Coming Home makes it easier to see your surroundings when you get out of your car in the dark. ⚙️ FUNCTION Change when the coming home lights timer will start to calculate. When Ignition OFF - after the ignition will be switched OFF, CH lights will start to work for the set time. When Door Open - after the doors will be opened, CH lights will start to work for the set time. 📖 REQUIREMENTS CH Lights function must be turned ON.
CH/LH Lights	CH - Coming Home makes it easier to see your surroundings when you get out of your car in the dark. LH - Leaving Home works by turning on the lights when you use the key fob to unlock your doors. ⚙️ FUNCTION Turn ON or OFF CH/LH Lights function. 📖 REQUIREMENTS The vehicle must have automatic headlights.
Windows and Sunroof Menu	⚙️ Functions Enable additional windows and sunroof setting menu in vehicle's multimedia system 📖 Requirements The vehicle must have a sunroof installed for the settings to work
Central lock with IGN	⚙️ Functions Activate central locking via remote when the Ignition is ON or the engine is running
Personalization via Key	Key personalization allows you to write the car settings into your operated key. For example, if your car has seat memory and you put the key in the ignition lock, the seat customizes according to your known key setting ⚙️ Functions Enable or disable the key personalization feature
Rear Windshield/Outside Mirror Heater Duration	The rear window and outside mirrors heater help to remove ice and condensation from the glass ⚙️ Functions Adjust for how long the rear windshield and outside mirror heater will be active after the activation. Choose between 200 s to 1600 s 📖 Requirements Outside mirrors should have a heater function
Rear Teardrop Wiping	Teardrop wipe is activated after you spray your window. It will normally wipe a few times, but with the teardrop wipe it does another wipe a couple of seconds later to catch the dribble ⚙️ Functions Enable or disable the teardrop wiping feature for the rear windscreen wiper 📖 Requirements The rear wiper must be installed in the vehicle
Comfort Operation via Remote	Choose the windows and sunroof opening type when operated via long-press on the remote. Holding the button with the lock symbol - will close the windows and sunroof. With the unlock mark - will open the windows and sunroof ⚙️ Functions Open/Close the windows and sunroof by holding the button on the remote ️⚠️ Attention Comfort windows and sunroof work simultaneously
Footwell Lights with Ignition ON	Footwell lights illuminate the footwell area of the vehicle's interior to provide lighting in the dark and to create a pleasant atmosphere ⚙️ Functions Enable footwell lights to remain ON while the ignition is ON 📖 Requirements Vehicle must have footwell lighting feature installed and activated
Fog Lights with High Beam	This function will activate high beams and fogs lights to illuminate at the same time ⚙️ Functions Active - Both high beams and fog lights can be lit at the same time Not Active - Fog lights will be OFF when high beams are ON 📖 Requirements The vehicle must be equipped with fog lights
DRL Dimming	DRL - Daytime Running Lights Separate daytime running lights keep your car visible to other drivers during the daytime even when the headlights are switched off. By default DRLs light up as soon as the engine is started ⚙️ Functions Adjust the brightness of daytime running lights to increase the lifetime of bulbs 📖 Requirements Use only with halogen DRL bulbs. LED bulbs might flicker when dimmed ️⚠️ Attention Decreased DRL brightness can be under the LAW in some countries where DRL is obligatory
Leaving Home Time	This application will allow you to adjust for how long leaving home lights are active ⚙️ Functions Adjust leaving home lights time from 10 seconds to 60 seconds 📖 Requirements The vehicle must have a working leaving home lights feature
Coming Home Time	This application will allow setting the time for how long coming home lights are active. ⚙️ Functions Adjust coming home lights time from 10 seconds to 60 seconds 📖 Requirements The vehicle must have a working coming home lights feature
Needle sweep	Gauge Test/Needle Sweep - sweep the gauge needles through their full range automatically on your dashboard when you turn the ignition on. ⚙️ FUNCTION Turn ON or OFF needle sweep on your vehicle. 📖 REQUIREMENTS Lock/unlock car after activation and check needle sweep then.
Windows/Sunroof with Ignition	Windows/Sunroof power can be swtiched OFF after the Ignition or leaved ON. Adjust the setting of windows/sunroof power after the ignition is switched OFF. ⚙️ FUNCTION Turn OFF or ON windows/sunroof power after the ignition is swtiched OFF.
Visual Confirmation for Comfort Operation	Comfort Operation - Open/Close the windows from the remote key by holding Lock/Unlock buttons (Lock - will close the windows/Unlock - will open the windows) The visual confirmation will let to know that the comfort operation has been successfully ended. ⚙️ FUNCTION Turn ON or OFF visual confirmation for comfort operation. 📖 REQUIREMENTS The comfort operation must be turned ON.
Tail Light Dimming	Select the tail light dimming changing the voltage. ⚙️ Functions Inactive - Direct battery voltage 12.3V - 7% 12.4V - 14% 12.5V - 21% 12.6V - 28% 12.7V - 35% 12.8V - 42% 12.9V - 49% 13.0V - 56% 13.1V - 63% 13.2V - 70% 13.3V - 77% 13.4V - 84% 13.5V - 91% 13.6V - 100%
Rear Fog OFF when High Beams ON	⚙️ FUNCTION Turn OFF or ON the function to turn OFF the rear fog light when the high beams are ON. OFF - the high beams will be active when the rear fog is turned ON. ON - the high beams will be inactive when the rear fog is turned ON.
Parking Lights OFF with Ignition OFF	When low beams are turned ON the parking lights are working. Adjust the settings to work or not to work the parking lights when the ignition is OFF and the position of the light is on low beams. ⚙️ FUNCTION Turn OFF or ON the function to turn OFF the parking lights after the ignition is switched OFF. ⚠️ ATTENTION Functions work only when the lights switch is set to the low beams.
Multi Function Indicator	⚙️ FUNCTION Turn OFF or ON the multi function indicator. 📖 REQUIREMENTS Vehicle must have multi function indicator.
Lock/Unlock- Horn Confirmation	This application will activate horn lock and unlock confirmation. Having this activated on your vehicle will allow you to walk away from your vehicle knowing that its secure. ⚙️ FUNCTION Turn ON or OFF horn confirmation of locking and unlocking. 📖 REQUIREMENTS Vehicle must have OEM security system installed.
Lock/Unlock Confirmation Turn Signals	Return message with turn signals when locking/unlocking via remote control. The function is useful to know do the vehicle was been locked or unlocked. ⚙️ FUNCTION Turn OFF or ON lock/unlock confirmation with turn signals. 📖 REQUIREMENTS Vehicle must have an original alarm security signal.
Instrument Cluster Language	⚙️ FUNCTION Change the language of the instrument cluster.
Instrument Cluster Country Version	⚙️ FUNCTION Change the instrument cluster country version. ⚠️ ATTENTION Could affect exterior lights.
Headlights for Traveling to RHD/LHD	Setting allows to switch the headlights between Left-Hand-Driving (LHD) and Right-Hand-Driving (RHD) when traveling into a country which is opposite to what the vehicle was originally made for. ⚙️ FUNCTION Turn OFF or ON the tourist mode for traveling to RHD/LHD countries. If the vehicle was originaly made for left hand driving, turning the application ON will set the headlights for right hand drive and vice versa.
Headlight Dimming	Select the headlight dimming changing voltage. ⚙️ Functions Inactive - Direct battery voltage 12.3V - 7% 12.4V - 14% 12.5V - 21% 12.6V - 28% 12.7V - 35% 12.8V - 42% 12.9V - 49% 13.0V - 56% 13.1V - 63% 13.2V - 70% 13.3V - 77% 13.4V - 84% 13.5V - 91% 13.6V - 100%
Enable Rear Wiper with Reverse Gear	When the front windshield wipers are ON, the rear window wiper will turn ON automatically when the vehicle is shifted into R (Reverse) gear. ⚙️ FUNCTION Activate (ON) or Deactivate (OFF) automatic Rear Window Wiping with Reverse Gear Interval - one time wipe. Permanent - wiper will wipe till reverse gear is engaged. 📖 REQUIREMENTS Front windshields wipers must be turned ON.
DRLs Inactive when Turn Signals Active	Daytime running lights (DRLs) inactive with turn signals active. ⚙️ FUNCTION Turn OFF or ON the function to DRLs be inactive when the turn signal is active. 📖 REQUIREMENTS The vehicle must have daytime running lights be activated.
Delay Alarm Activation	Select how to start the anti-theft alarm delay. When the door is opened/when the door is unclocked. ⚙️ Functions Door Opened Door is Unlocked 📖 Requirements The vehicle must have an original anti-theft system installed.
Comfort Windows Operation in Door Lock	Open or close windows and sunroof using door lock. ⚙️ FUNCTION Turn OFF or ON the comfort windows in the door lock. After turning ON, hold the key in the door lock to unlock position to open or in lock position to close. 📖 REQUIREMENTS Windows must be calibrated.
Comfort Operation for Sunroof	Comfort opening and closing for sunroof holding the lock/unlock button on remote. ⚙️ FUNCTION Turn OFF or ON the comfort operation for sunroof. Hold the unlock button on remote key to open the sunroof or hold the lock button to close it.
Comfort Operation for Driver's Window	Comfort operation will work only for the driver's window. ⚙️ FUNCTION Turn OFF or ON the comfort operation only for the driver's window. After turning the function ON, hold the unlock button on the remote, and the driver's window will open. Vice versa with the lock button. 📖 REQUIREMENTS Windows must be calibrated.
Comfort Opening Type for Sunroof	The sunroof have two types for comfort operation. ⚙️ FUNCTION Select to Open or Lift the sunroof in comfort operation. 📖 REQUIREMENTS The comfort operation for sunroof must be turned ON.
CH/LH Lights via Low Beams/Fog Lights	CH - Coming Home makes it easier to see your surroundings when you get out of your car in the dark. LH - Leaving Home works by turning on the lights when you use the key fob to unlock your doors. ⚙️ FUNCTION Change the CH/LH lights to work via low beams or the fog lights. 📖 REQUIREMENTS CH/LH Lights function must be turned ON.
Windows and Sunroof Menu	⚙️ Functions Enable additional windows and sunroof setting menu in vehicle's multimedia system 📖 Requirements The vehicle must have a sunroof installed for the settings to work
Central lock with IGN	⚙️ Functions Activate central locking via remote when the Ignition is ON or the engine is running
Personalization via Key	Key personalization allows you to write the car settings into your operated key. For example, if your car has seat memory and you put the key in the ignition lock, the seat customizes according to your known key setting ⚙️ Functions Enable or disable the key personalization feature
Rear Windshield/Outside Mirror Heater Duration	The rear window and outside mirrors heater help to remove ice and condensation from the glass ⚙️ Functions Adjust for how long the rear windshield and outside mirror heater will be active after the activation. Choose between 200 s to 1600 s 📖 Requirements Outside mirrors should have a heater function
Rear Teardrop Wiping	Teardrop wipe is activated after you spray your window. It will normally wipe a few times, but with the teardrop wipe it does another wipe a couple of seconds later to catch the dribble ⚙️ Functions Enable or disable the teardrop wiping feature for the rear windscreen wiper 📖 Requirements The rear wiper must be installed in the vehicle
Comfort Operation via Remote	Choose the windows and sunroof opening type when operated via long-press on the remote. Holding the button with the lock symbol - will close the windows and sunroof. With the unlock mark - will open the windows and sunroof ⚙️ Functions Open/Close the windows and sunroof by holding the button on the remote ️⚠️ Attention Comfort windows and sunroof work simultaneously
Footwell Lights with Ignition ON	Footwell lights illuminate the footwell area of the vehicle's interior to provide lighting in the dark and to create a pleasant atmosphere ⚙️ Functions Enable footwell lights to remain ON while the ignition is ON 📖 Requirements Vehicle must have footwell lighting feature installed and activated
Fog Lights with High Beam	This function will activate high beams and fogs lights to illuminate at the same time ⚙️ Functions Active - Both high beams and fog lights can be lit at the same time Not Active - Fog lights will be OFF when high beams are ON 📖 Requirements The vehicle must be equipped with fog lights
DRL Dimming	DRL - Daytime Running Lights Separate daytime running lights keep your car visible to other drivers during the daytime even when the headlights are switched off. By default DRLs light up as soon as the engine is started ⚙️ Functions Adjust the brightness of daytime running lights to increase the lifetime of bulbs 📖 Requirements Use only with halogen DRL bulbs. LED bulbs might flicker when dimmed ️⚠️ Attention Decreased DRL brightness can be under the LAW in some countries where DRL is obligatory
Leaving Home Time	This application will allow you to adjust for how long leaving home lights are active ⚙️ Functions Adjust leaving home lights time from 10 seconds to 60 seconds 📖 Requirements The vehicle must have a working leaving home lights feature
Coming Home Time	This application will allow setting the time for how long coming home lights are active. ⚙️ Functions Adjust coming home lights time from 10 seconds to 60 seconds 📖 Requirements The vehicle must have a working coming home lights feature
Needle sweep	Gauge Test/Needle Sweep - sweep the gauge needles through their full range automatically on your dashboard when you turn the ignition on. ⚙️ FUNCTION Turn ON or OFF needle sweep on your vehicle. 📖 REQUIREMENTS Lock/unlock car after activation and check needle sweep then.
Windows/Sunroof with Ignition	Windows/Sunroof power can be swtiched OFF after the Ignition or leaved ON. Adjust the setting of windows/sunroof power after the ignition is switched OFF. ⚙️ FUNCTION Turn OFF or ON windows/sunroof power after the ignition is swtiched OFF.
Visual Confirmation for Comfort Operation	Comfort Operation - Open/Close the windows from the remote key by holding Lock/Unlock buttons (Lock - will close the windows/Unlock - will open the windows) The visual confirmation will let to know that the comfort operation has been successfully ended. ⚙️ FUNCTION Turn ON or OFF visual confirmation for comfort operation. 📖 REQUIREMENTS The comfort operation must be turned ON.
Tail Light Dimming	Select the tail light dimming changing the voltage. ⚙️ Functions Inactive - Direct battery voltage 12.3V - 7% 12.4V - 14% 12.5V - 21% 12.6V - 28% 12.7V - 35% 12.8V - 42% 12.9V - 49% 13.0V - 56% 13.1V - 63% 13.2V - 70% 13.3V - 77% 13.4V - 84% 13.5V - 91% 13.6V - 100%
Rear Fog OFF when High Beams ON	⚙️ FUNCTION Turn OFF or ON the function to turn OFF the rear fog light when the high beams are ON. OFF - the high beams will be active when the rear fog is turned ON. ON - the high beams will be inactive when the rear fog is turned ON.
Parking Lights OFF with Ignition OFF	When low beams are turned ON the parking lights are working. Adjust the settings to work or not to work the parking lights when the ignition is OFF and the position of the light is on low beams. ⚙️ FUNCTION Turn OFF or ON the function to turn OFF the parking lights after the ignition is switched OFF. ⚠️ ATTENTION Functions work only when the lights switch is set to the low beams.
Multi Function Indicator	⚙️ FUNCTION Turn OFF or ON the multi function indicator. 📖 REQUIREMENTS Vehicle must have multi function indicator.
Lock/Unlock- Horn Confirmation	This application will activate horn lock and unlock confirmation. Having this activated on your vehicle will allow you to walk away from your vehicle knowing that its secure. ⚙️ FUNCTION Turn ON or OFF horn confirmation of locking and unlocking. 📖 REQUIREMENTS Vehicle must have OEM security system installed.
Lock/Unlock Confirmation Turn Signals	Return message with turn signals when locking/unlocking via remote control. The function is useful to know do the vehicle was been locked or unlocked. ⚙️ FUNCTION Turn OFF or ON lock/unlock confirmation with turn signals. 📖 REQUIREMENTS Vehicle must have an original alarm security signal.
Instrument Cluster Language	⚙️ FUNCTION Change the language of the instrument cluster.
Instrument Cluster Country Version	⚙️ FUNCTION Change the instrument cluster country version. ⚠️ ATTENTION Could affect exterior lights.
Headlights for Traveling to RHD/LHD	Setting allows to switch the headlights between Left-Hand-Driving (LHD) and Right-Hand-Driving (RHD) when traveling into a country which is opposite to what the vehicle was originally made for. ⚙️ FUNCTION Turn OFF or ON the tourist mode for traveling to RHD/LHD countries. If the vehicle was originaly made for left hand driving, turning the application ON will set the headlights for right hand drive and vice versa.
Headlight Dimming	Select the headlight dimming changing voltage. ⚙️ Functions Inactive - Direct battery voltage 12.3V - 7% 12.4V - 14% 12.5V - 21% 12.6V - 28% 12.7V - 35% 12.8V - 42% 12.9V - 49% 13.0V - 56% 13.1V - 63% 13.2V - 70% 13.3V - 77% 13.4V - 84% 13.5V - 91% 13.6V - 100%
Enable Rear Wiper with Reverse Gear	When the front windshield wipers are ON, the rear window wiper will turn ON automatically when the vehicle is shifted into R (Reverse) gear. ⚙️ FUNCTION Activate (ON) or Deactivate (OFF) automatic Rear Window Wiping with Reverse Gear Interval - one time wipe. Permanent - wiper will wipe till reverse gear is engaged. 📖 REQUIREMENTS Front windshields wipers must be turned ON.
DRLs Inactive when Turn Signals Active	Daytime running lights (DRLs) inactive with turn signals active. ⚙️ FUNCTION Turn OFF or ON the function to DRLs be inactive when the turn signal is active. 📖 REQUIREMENTS The vehicle must have daytime running lights be activated.
Delay Alarm Activation	Select how to start the anti-theft alarm delay. When the door is opened/when the door is unclocked. ⚙️ Functions Door Opened Door is Unlocked 📖 Requirements The vehicle must have an original anti-theft system installed.
Comfort Windows Operation in Door Lock	Open or close windows and sunroof using door lock. ⚙️ FUNCTION Turn OFF or ON the comfort windows in the door lock. After turning ON, hold the key in the door lock to unlock position to open or in lock position to close. 📖 REQUIREMENTS Windows must be calibrated.
Comfort Operation for Sunroof	Comfort opening and closing for sunroof holding the lock/unlock button on remote. ⚙️ FUNCTION Turn OFF or ON the comfort operation for sunroof. Hold the unlock button on remote key to open the sunroof or hold the lock button to close it.
Comfort Operation for Driver's Window	Comfort operation will work only for the driver's window. ⚙️ FUNCTION Turn OFF or ON the comfort operation only for the driver's window. After turning the function ON, hold the unlock button on the remote, and the driver's window will open. Vice versa with the lock button. 📖 REQUIREMENTS Windows must be calibrated.
Comfort Opening Type for Sunroof	The sunroof have two types for comfort operation. ⚙️ FUNCTION Select to Open or Lift the sunroof in comfort operation. 📖 REQUIREMENTS The comfort operation for sunroof must be turned ON.
CH/LH Lights via Low Beams/Fog Lights	CH - Coming Home makes it easier to see your surroundings when you get out of your car in the dark. LH - Leaving Home works by turning on the lights when you use the key fob to unlock your doors. ⚙️ FUNCTION Change the CH/LH lights to work via low beams or the fog lights. 📖 REQUIREMENTS CH/LH Lights function must be turned ON.
Multimedia Safety Disclaimer	When the vehicle engine starts with a passenger in the front seat, the safety disclaimer informs the driver about potential hazards. ⚙️ Functions Enable or disable the safety disclaimer message on the multimedia screen. ️⚠️ Attention This app is not supported with MIB3 multimedia units.
Multimedia Safety Disclaimer	When the vehicle engine starts with a passenger in the front seat, the safety disclaimer informs the driver about potential hazards. ⚙️ Functions Enable or disable the safety disclaimer message on the multimedia screen. ️⚠️ Attention This app is not supported with MIB3 multimedia units.
Seat belt warning	⚙️ FUNCTION OFF - Disable Seat-Belt Warning ON - Activate Seat-Belt Warning 📖 REQUIREMENTS This application does not work if engine is running. Only use this function with ignition ON. ⚠️ ATTENTION Driving without Seat-Belt violates the law in many countries! We do not encourage or recommend Seat - Belt Warning deactivation, because in case of an accident, protection systems (Airbags, Seat-Belt pretensioners, etc.) will only protect the driver or passengers if Seat-Belts are buckled.
Comfort turn signal	Comfort turn Signals - Increase number of indicator flashes when you turn on turn signal. ⚙️ FUNCTION Adjust comfort turn signals cycle from 2-5. ☑️ IN-CAR PROCEDURE 1. Press the Car button on the multimedia. 2. Press Set-up 3.In the Vehicle Setting screen, press the Factory Settings panel (it's at the very end of the list at the bottom of the screen) 4. In the Factory Settings screen, under Reset individual settings/data, press Vehicle, or Lights 5. Press Reset tab in the window that says Reset "Vehicle/Lights" settings-are you sure? 6. Press YES. Now your turn signal cycle should change.
DRL in MFD+	This one-click application will Activate/Deactivate the daytime running lights settings in the instrument cluster multi-function display. DRL - Daytime Running Lights MFD - Multifunction Display ⚙️ FUNCTION Turn ON or OFF DRL settings in MFD+ 📖 REQUIREMENTS ALL doors must be unlocked by using the Lock/Unlock button on DRIVER DOORS. Vehicle must have MFD+.
Seat belt warning	⚙️ FUNCTION OFF - Disable Seat-Belt Warning ON - Activate Seat-Belt Warning 📖 REQUIREMENTS This application does not work if engine is running. Only use this function with ignition ON. ⚠️ ATTENTION Driving without Seat-Belt violates the law in many countries! We do not encourage or recommend Seat - Belt Warning deactivation, because in case of an accident, protection systems (Airbags, Seat-Belt pretensioners, etc.) will only protect the driver or passengers if Seat-Belts are buckled.
Comfort turn signal	Comfort turn Signals - Increase number of indicator flashes when you turn on turn signal. ⚙️ FUNCTION Adjust comfort turn signals cycle from 2-5. ☑️ IN-CAR PROCEDURE 1. Press the Car button on the multimedia. 2. Press Set-up 3.In the Vehicle Setting screen, press the Factory Settings panel (it's at the very end of the list at the bottom of the screen) 4. In the Factory Settings screen, under Reset individual settings/data, press Vehicle, or Lights 5. Press Reset tab in the window that says Reset "Vehicle/Lights" settings-are you sure? 6. Press YES. Now your turn signal cycle should change.
DRL in MFD+	This one-click application will Activate/Deactivate the daytime running lights settings in the instrument cluster multi-function display. DRL - Daytime Running Lights MFD - Multifunction Display ⚙️ FUNCTION Turn ON or OFF DRL settings in MFD+ 📖 REQUIREMENTS ALL doors must be unlocked by using the Lock/Unlock button on DRIVER DOORS. Vehicle must have MFD+.